AI1 0 1 1 0 1 0 0 1 1 0 10 1 0 0 1 1 0 1 0 1 1 0 1Ai Me Bro

Indoor mini light-show swarm with 3 Crazyflies

Three palm-sized Crazyflie 2.1+ quadcopters, each with a Flow deck v2 to hold position and a top-mounted Color LED deck, fly a short choreographed light show from a Python script on your laptop through one Crazyradio 2.0.

AdvancedBuild time: 6-10 hours (mostly software), no printing requiredParts: $995-1025
Illustration of Indoor mini light-show swarm with 3 Crazyflies
Illustration. An artist's impression, not a photo of a finished build. Your build will look different.

Safety first

  • Props spin fast enough to cut skin and eyes. Fly behind a net or with spectators well back, and keep a kill key in the script (and know where it is).
  • Charge the small LiPo cells only with the Crazyflie or the Bitcraze USB charger, never unattended. Do not use a swollen or damaged cell.
  • Optical flow drifts over plain, shiny or dark floors. Use a textured mat and good light, keep 1 m or more between drones, and test each drone alone first.
  • Start with low altitudes (0.5 m) and short routines. Never fly over people.

Rules and laws

  • This project is meant for indoor flying; the FAA does not regulate flights fully inside a building.
  • In the US, every recreational flyer who flies outdoors must pass the free FAA TRUST test, whatever the aircraft weighs.
  • Each Crazyflie 2.1+ weighs well under 250 g with its decks, so FAA registration and Remote ID do not apply to recreational outdoor flights in the US. Check https://www.faa.gov/uas for the current text. Rules differ outside the US.

Parts

PartQtyApprox. eachSubtotal
Bitcraze Crazyflie 2.1+Price seen $240.00 each on the Bitcraze store (Nov 12, 2026). Comes with one 250 mAh battery and props.Bitcraze3$240$720
Bitcraze Flow deck v2Price seen $55.00 each on the Bitcraze store (Nov 12, 2026). Bottom-mounted; holds position over a textured floor.Bitcraze3$55$165
Bitcraze Color LED Deck (top-mounted)Price seen $23.00 each on the Bitcraze store (Nov 12, 2026). Top-mounted version, so it does not clash with the bottom Flow deck.Bitcraze3$23$69
Bitcraze Crazyradio 2.0Price seen $43.00 on the Bitcraze store (Nov 12, 2026). One radio can talk to several Crazyflies.Bitcraze1$43$43
Bitcraze 250 mAh LiPo battery (spare)Skip if you already own one. Skip if you already own one. Price seen $6.50 each on the Bitcraze store (Nov 12, 2026). One spare per drone; each Crazyflie already comes with one battery and charges it over USB.Bitcraze3$6.50$19.50
Bitcraze propeller packSkip if you already own one. Skip if you already own one. Price seen $6.50 on the Bitcraze store (Nov 12, 2026). Spare props; each Crazyflie already comes with a set.Bitcraze1$6.50$6.50
Estimated total (parts only)$1,023

Typical US prices, checked 2026-11-12. Prices change and multi-packs are often cheaper per piece.

As an Amazon Associate I earn from qualifying purchases. Prices change; check the store.

Filament

No 3D printing needed.

AI agents you'll use

  • Code helper (ChatGPT, Claude, Gemini or Grok): Writes the cflib swarm script: connect to three URIs, take off together, run timed waypoints and LED colors, land, and handle a lost link safely.
  • Choreography helper: Turns a description like "three drones rise in a line, rotate into a triangle, pulse blue" into a timed list of positions and colors with at least 1 m separation.
  • Safety research helper: Summarizes current FAA recreational rules for outdoor flights and reminds you to confirm on the official FAA site.

Tools

  • Laptop with Python 3 and a free USB port
  • Small screwdriver
  • Soft net or a clear indoor room
  • Textured floor mat if your floor is plain

What you'll learn

  • Swarm control with the official cflib Python library
  • How optical-flow position hold works and where it drifts
  • Timing a light and motion choreography
  • Indoor flight safety

Real drone light shows use hundreds of aircraft. This is the desk-sized version: three 27-gram quadcopters that take off together, move into shapes and change colors on cue, all from a Python script.

What you'll build

Three Crazyflie 2.1+ drones, each with a Flow deck v2 underneath for position hold and a top-mounted Color LED deck. One Crazyradio 2.0 on your laptop talks to all three. A Python script using the official cflib library sends timed position setpoints and LED colors, so the drones fly a 30-60 second show in a room about 4 x 4 m.

The cost range is narrow on purpose: every part is a single-vendor item with a fixed list price on the Bitcraze store, so prices do not swing the way generic parts do. The only spread is the optional spare batteries and props. Shipping and any import duties are extra and not included.

The cost range is $995-1025. The low end assumes you already own these items marked "skip if you already own one": Bitcraze 250 mAh LiPo battery (spare), Bitcraze propeller pack. The high end includes them.

Print the parts

Nothing to print. The Crazyflie is a ready-made kit you assemble (motors and props snap into the frame), and the decks plug onto its headers. Mount the Flow deck underneath and the Color LED deck on top, as the Bitcraze docs show.

Wiring

There is no wiring: decks plug onto the Crazyflie expansion headers and are detected automatically.

Item Where it goes Notes
Flow deck v2 Bottom of each Crazyflie Camera and range sensor face the floor.
Color LED Deck (top-mounted) Top of each Crazyflie Top version so it does not clash with the Flow deck.
Crazyradio 2.0 Laptop USB port Flash the latest firmware with the Bitcraze tools first.
Battery Crazyflie battery holder Charge over the Crazyflie micro-USB.

Step-by-step

  1. Assemble each Crazyflie as the Bitcraze getting-started guide shows, and update its firmware with the official client.
  2. Give each drone its own radio address (URI), for example ending E7E7E7E7E1, E2 and E3.
  3. Fly each drone alone with the Flow deck and the official client, hovering at 0.5 m over a textured floor.
  4. Install cflib and run Bitcraze's swarm example with one drone, then two, then three.
  5. Ask the choreography helper for a 30-second show, then check that every position keeps 1 m between drones.
  6. Add LED colors to each step of the show.
  7. Rehearse at half speed and low height, then run the real show with spectators behind the net line.

Code

Python 3 with the official cflib library and its swarm helper. Keep a keyboard kill switch that sends stop to every drone.

Prompt for the code helper:

Write a Python 3 script using Bitcraze cflib (Swarm and high-level commander) for three Crazyflie 2.1+ with Flow deck v2 and the Color LED deck.
URIs: radio://0/80/2M/E7E7E7E7E1, ...E2, ...E3. Take off to 0.5 m, run this timed list of (time, drone, x, y, z, color) steps I will paste, then land.
Check every step keeps 1.0 m between drones and refuse to run if not. Pressing Ctrl+C must land all drones; a lost link must stop that drone.
Look up the current Color LED deck parameter names in the Bitcraze docs rather than guessing them.

Troubleshooting

  • Drone drifts or slides away: The Flow deck cannot see floor texture. Add a patterned mat and more light.
  • Only one drone connects: Each one needs a unique address, and all three must be on the same channel as the radio.
  • Show timing slips: Use the high-level commander's timed goto commands rather than sleeping in Python between steps.

Last checked 2026-11-12. Double-check parts against your own board and seller listings before you buy.

Indoor mini light-show swarm with 3 Crazyflies: parts, filament and AI agents | Ai Me Bro